Leznykivske granite
In short
Leznykivske granite is red-pink with dark mineral grains. Leznykivske material is recognised by a warm red or pink-red character with contrasting grains. It is an expressive stone that works as an accent in its own right rather than as a background.
Its saturated tone pairs well with grey Pokostivske stone and with dark gabbro. The name does not guarantee one exact shade: natural stone varies from batch to batch.
Compare this stone with the others in the granite types section, and read more about sample approval in Leznykivske granite: red character and batch approval.
Specifications
| Parameter | Description |
|---|---|
| Colour | red-pink with dark mineral grains |
| Finish and grain | pronounced grain with visible contrast between light and dark minerals |
| Typical use | façades, setts, architectural details, memorials |
| Finishes | polished, honed, thermal, split, sawn-and-split |
| Maintenance | Regular cleaning with neutral, non-abrasive products; the exact chemistry and cleaning frequency are agreed for the finish and the location. |
Where it is used
A red stone belongs where an accent or a warm tone is needed within a restrained setting. It is usually considered for:
- façades and architectural details that should draw attention
- paving in sawn, split or sawn-and-split finish
- steps, entrance areas and landscape elements
- memorial products and headstones
Products made from this stone are collected in the catalogue: Leznykivske granite products. Format, thickness and finish are confirmed for the specific project.
What to consider
Red saturation changes with the finish and the light more strongly than grey varieties do. That is why a single photograph is not enough.
- Polishing deepens contrast and gloss, while a natural fracture scatters light and looks different.
- Approve the sample in the finish that the product will actually have, not only polished.
- Record the permitted dark and light inclusions in the specification.
- For large areas, review several units taken from different packs.
- Availability, quantity and batch are confirmed in a reply to your request, not by a page name.
Do not choose the material just because the description says “red”: alongside other stones the same tone can read differently.
Physical and mechanical properties
| Property | Value | Source |
|---|---|---|
| Density | 2,650–2,680 kg/m³; typical 2,650 kg/m³ | ESU (Encyclopedia of Modern Ukraine), 'Leznykivske granite deposit' (bulk weight 2,650 kg/m³); ZSTU course notes (2.68 g/cm³); kameniv.com.ua, Maple Red (2,650 kg/m³); ukr.granite.ua, Maple Red (2,650 kg/m³) |
| Water absorption | 0.18–0.50 % | ESU (0.18 %); ukr.granite.ua (0.18 %); ZSTU course notes, Liznykivske deposit (0.5 %) |
| Compressive strength | 135–270 MPa | ESU (140–260 MPa); ZSTU course notes (138–270 MPa); ukr.granite.ua (135–260 MPa) |
| Abrasion | 0.24 g/cm² | ESU (wear resistance 0.24 g/cm); kameniv.com.ua (0.24 g/cm²); ukr.granite.ua (0.24 g/cm²) |
| Radiation safety class | Class 1 | ESU, 'Leznykivske granite deposit' ('natural radiation level — class 1'); ukr.granite.ua |
| Mineral composition | microcline ~80 %, quartz ~15 %, biotite ~5 %, other up to 1 % | ESU, 'Leznykivske granite deposit' |
The values are typical/reference figures for the Leznykivske deposit (trade name Maple Red). Density varies between sources (2,650 kg/m³ per ESU and manufacturers versus 2.68 g/cm³ per ZSTU). No separate official deposit certificate was found in open access, so actual figures are confirmed per batch.
Products in this stone
Frequently asked questions
Is Leznykivske granite always bright red?
No. Saturation depends on the natural batch, the finish, lighting and moisture. A physical sample from the current batch is required.
Do a polished slab and split setts look the same?
No. Polishing deepens contrast and gloss, while a natural fracture scatters light and creates a different surface. Each finish is approved with its own sample.
Does the name mean the material is in stock?
No. The name describes the character of the stone. Availability, format, quantity and the specific batch are confirmed when you order.
